Discount Marine Parts Direct

MerCruiser® 8M0186195 MAP Sensor

MerCruiser® 8M0186195 MAP Sensor

MAP — Manifold Absolute Pressure Sensor

MerCruiser® 8M0186195 MAP Sensor

Current Mercury: 8M0186195Historical OEM: 861249A1 / 881731Sourcing in Progress

8M0186195 is the current Mercury/MerCruiser replacement for multiple earlier MAP sensor numbers, depending on engine and application. Historical OEM numbers include 861249, 861249A1 (earlier EFI/MPI applications) and 881731 (8.1L/496 generation). These predecessor numbers do not share a single linear chain — their historical lineage is application-specific.

This is a MAP (Manifold Absolute Pressure) sensor — it measures pressure only. Do not confuse with the MAPT sensor (885165 / 8M0087834) used in ECM-555 applications, which combines pressure and temperature sensing in a single unit.

Historical OEM lineage is application-specific. 861249 / 861249A1 applies to the earlier EFI/MPI branch (4.3L, 5.0L, 5.7L EFI; 7.4L L29 MPI). 881731 applies to the 8.1L/496 generation. An intermediate number 8M0054726 also supersedes to 8M0186195 on later 8.1L/496 applications — this intermediate step is not represented in the compatibility table but is noted here for reference.

Mercury MerCruiser 8M0186195 MAP sensor with 3-pin connector and inward-facing retention hooks
8M0186195 MAP Sensor — current Mercury/MerCruiser replacement for 861249A1 and 881731. Note: 8M0186195 may look different from the original part. Refer to part number when ordering.

8M0186195 is the current Mercury/MerCruiser MAP (Manifold Absolute Pressure) sensor replacement for a range of earlier EFI and MPI engine applications. Different engine generations carried different historical OEM numbers before superseding to the current 8M0186195.

For earlier EFI/MPI applications — including the 4.3L EFI, 5.0L EFI, 5.7L EFI, 7.4L MPI L29, and 7.4L MPI MIE L29 families — the historical MAP sensor number is 861249A1 (and its predecessor 861249). For the 8.1L MIE and 496 Mag generation, the historical number is 881731.

A MAP sensor reports intake-manifold absolute pressure information to the engine control module (ECM). The ECM uses this signal as one input when determining engine load, operating conditions, and fuel/ignition strategy. This sensor measures pressure only — it does not measure temperature.

MAP-related symptoms can overlap with vacuum leaks, wiring faults, connector problems, fuel-delivery problems, and other engine-management faults. Symptoms alone do not establish a failed MAP sensor. Proper diagnosis using the appropriate service documentation is required before replacing this component.

Fitment must be determined by engine model, application, and serial number — not by historical OEM number alone. The convergence of multiple historical numbers on 8M0186195 does not imply that all historical applications are interchangeable. Verify your exact engine model, serial number, and existing OEM part number against the application table before ordering.

8M0186195 MAP sensor electrical connector — 3-pin terminal view
Electrical Connector (3-Pin)
8M0186195 MAP sensor pressure port with integral orange/red seal
Pressure Port (MAP) with Integral Seal
8M0186195 MAP sensor four inward-facing snap-in retention hooks
Retention Hooks — Four Inward-Facing Snap-In
8M0186195 MAP sensor product reference sheet with specifications and cross-reference
Product Reference Sheet

This MAP sensor applies to the 4.3L EFI, 5.0L EFI, 5.7L EFI, 7.4L MPI L29, 7.4L MPI MIE L29, 496 Mag, and 8.1L MIE engine families. It is NOT the correct sensor for 454 MAG MPI / 502 Magnum MPI (those use 864856A1), and NOT the correct sensor for ECM-555 applications (those use MAPT 885165 / 8M0087834). Verify your exact engine model, serial number, and existing OEM part number before ordering.

Aftermarket cross-reference: Sierra 18-7660 (aftermarket — not a Mercury/MerCruiser OEM number). Verify fitment independently before ordering any aftermarket part.

Verified Engine Applications

Application relationships are verified against Mercury Marine primary source documentation. Historical OEM lineage is application-specific — 861249A1 applies to the earlier EFI/MPI branch; 881731 applies to the 8.1L/496 generation. The convergence of these historical numbers on 8M0186195 does not imply interchangeability across all applications.

MerCruiser® 4.3L EFI (GEN+) TBI — GM 262 V6Verification in Progress
Years: Verification in ProgressEngine Serial: 0L012009–0L618999Historical OEM: 861249A1
VIEW MAP SENSOR
MerCruiser® 4.3L EFI (GEN+) TBI — GM 262 V6Verification in Progress
Years: Verification in ProgressEngine Serial: 0L619000–0M322780Historical OEM: 861249A1
VIEW MAP SENSOR
MerCruiser® 5.0L EFI — GM 305 V8Verified
Years: 1998Engine Serial: 0L012052–0L339999Historical OEM: 861249A1
VIEW MAP SENSOR
MerCruiser® 5.0L EFI — GM 305 V8Verified
Years: 1999–2001Engine Serial: 0L331631–0M299999Historical OEM: 861249A1
VIEW MAP SENSOR
MerCruiser® 5.7L EFI — GM 350 V8Verified
Years: 1998Engine Serial: 0L010035–0L339999Historical OEM: 861249A1
VIEW MAP SENSOR
MerCruiser® 5.7L EFI — GM 350 V8Verified
Years: 1999–2001Engine Serial: 0L325977–0M299999Historical OEM: 861249A1
VIEW MAP SENSOR
MerCruiser® 7.4L MPI L29 — 454 V8Verified
Years: 1998–2001Engine Serial: 0L010003–0M024330Historical OEM: 861249A1
VIEW MAP SENSOR
MerCruiser® 7.4L MPI MIE L29 — 454 V8Verified
Years: 1998–2001Engine Serial: 0L010003–0L674613Historical OEM: 861249A1
VIEW MAP SENSOR
MerCruiser® 8.1L MIE — 496 V8Verified
Years: 2001–2004Engine Serial: 0M026000–0W089999Historical OEM: 881731
VIEW MAP SENSOR
MerCruiser® 8.1L MIE — 496 V8Verified
Years: 2004–2008Engine Serial: 0W090000 and upHistorical OEM: 881731
VIEW MAP SENSOR
MerCruiser® 8.1L HO MIE — 496 V8Verified
Years: 2001–2004Engine Serial: 0M026000–0W089999Historical OEM: 881731
VIEW MAP SENSOR
MerCruiser® 8.1L HO MIE — 496 V8Verified
Years: 2004–2008Engine Serial: 0W090000 and upHistorical OEM: 881731
VIEW MAP SENSOR
MerCruiser® 496 Mag — 496 V8Verified
Years: 2001–2004Engine Serial: 0M025000–0W059999Historical OEM: 881731
VIEW MAP SENSOR
MerCruiser® 496 Mag — 496 V8Verified
Years: 2004–2008Engine Serial: 0W060000 and upHistorical OEM: 881731
VIEW MAP SENSOR
MerCruiser® 496 Mag HO — 496 V8Verified
Years: 2001–2004Engine Serial: 0M025000–0W059999Historical OEM: 881731
VIEW MAP SENSOR
MerCruiser® 496 Mag HO — 496 V8Verified
Years: 2004–2008Engine Serial: 0W060000 and upHistorical OEM: 881731
VIEW MAP SENSOR
MerCruiser® 496 Mag DTS — 496 V8Verified
Years: 2001–2004Engine Serial: 0M025000–0W059999Historical OEM: 881731
VIEW MAP SENSOR
MerCruiser® 496 Mag DTS — 496 V8Verified
Years: 2004–2008Engine Serial: 0W060000 and upHistorical OEM: 881731
VIEW MAP SENSOR
MerCruiser® 496 Mag HO DTS — 496 V8Verified
Years: 2001–2004Engine Serial: 0M025000–0W059999Historical OEM: 881731
VIEW MAP SENSOR
MerCruiser® 496 Mag HO DTS — 496 V8Verified
Years: 2004–2008Engine Serial: 0W060000 and upHistorical OEM: 881731
VIEW MAP SENSOR

Customers Replacing This Part Also Consider

Related components are shown only for verified engine/application matches. The 7.4L L29 and 496/8.1L use different injector families — do not mix recommendation sets.

MerCruiser® 4.3L EFI (GEN+) TBI — GM 262 V6 — Verification in Progress

MerCruiser® 5.0L EFI — GM 305 V8 — 1998

MerCruiser® 5.0L EFI — GM 305 V8 — 1999–2001

MerCruiser® 5.7L EFI — GM 350 V8 — 1998

MerCruiser® 5.7L EFI — GM 350 V8 — 1999–2001

MerCruiser® 496 Mag DTS — 496 V8 — 2004–2008

MerCruiser® 496 Mag HO DTS — 496 V8 — 2004–2008